Huanan Heavy Industry Technology Co., Ltd.
Add to Cart
Description of Silver Extruder
1. Equipment definition
Silver extruder is a special equipment that drives the die through a high-pressure hydraulic system to extrude silver ingots (or silver alloys) into silver tubes, silver rods, silver wires, and special-shaped materials. It is widely used in the production of jewelry, electronics, and industrial silver parts.
2. Working principle
Feeding: The silver billet is heated to the plastic deformation temperature (pure silver is about 200-400℃).
Extrusion: The hydraulic cylinder pushes the extrusion rod, and the silver billet is formed through the die.
Cooling/cutting: The formed silver material is cut to a fixed length after water cooling or air cooling.
Material and specifications of main parts
| Item | Specification & Materials details |
| Master cylinder: | 35# forged steel |
| Piston: | Φ750mm alloy chilled cast iron |
| Auxiliary cylinder: | Φ160mm 2 pieces |
| Container cylinder: | Φ160mm 4 pieces |
| Front beam: | 485 mm thick+15mm(table),500mm tick, material: 45# steel |
| Outlet: | short axis 170mm x long axis 210mm |
| Slider base: | thick 260mm 45# steel |
| Movable beam: | thick 270mm 45# steel |
| Tie rods: | Φ210mm 45# steel quenched and tempered |
| Insulation seat: | ZG35 |
| Container outside cover: | 5CrMnMo forged steel heat treatment |
| Container liner: | H13 Forged Steel Heat Treatment |
| Stem : | H13 Forged Steel Heat Treatment |
| Dummy block: | H13 forged steel heat treatment |
Advantages of short-stroke back loading structure
1. The extrusion stroke of the short-stroke extruder is notably shorter than that of conventional extruders, resulting in a reduced frame opening. This design enhancement significantly increases the rigidity of the stress frame, surpassing traditional extruders by 30%.
2. By decreasing the volume of the main side cylinder, hydraulic oil usage is minimized. This reduction enhances both speed and pressure control accuracy while also shortening the time required for pressure adjustments. Consequently, energy consumption is lowered, and the impact of oil during pressure relief is mitigated.
3.Eliminating the gasket circulation system not only reduces reactive operation time but also diminishes the power consumption of the production line. As a result, non-extrusion time is reduced by 15%.
4.Implementation of a translation manipulator powered by a servo motor contributes to a 15% decrease in non-extrusion time.
Application Field
1. Jewelry processing
Products: Silver bracelet hollow tube, silver wire (Φ0.5-5mm), embossed silver sheet
Advantages: Seamless one-piece molding, surface finish Ra≤0.8μm
2. Electronic industry
Products: Silver contacts, conductive silver sheets, vacuum solder
Advantages: High density (≥99% theoretical density), conductivity ≥100% IACS
3. Industrial silver materials
Products: Silver welding rods, nuclear industry shielding materials, special-shaped silver parts
Advantages: Supports complex cross-sections (such as internal tooth silver tubes, porous silver plates)
Technical Characteristics and Specification
Hydraulic system: Provides stable pressure (200-1500T), variable pump energy-saving design.
Extrusion cylinder: High temperature resistant alloy steel (H13 material), mirror polished inner wall to reduce friction.
Mold system: Carbide/tungsten steel material, quick change design (supports customization of special-shaped molds).
Heating module: resistance/induction heating, temperature control accuracy ±2℃ (to prevent silver oxidation).
Control system: PLC+touch screen, can store process parameters (pressure, speed, temperature curve).
Technical Date
| 1000T Technical Parameters | |
| 1.Extrusion capacity : | |
| Machine extrusion force: | 21Mpa 1000T(1100UST) |
| 2.Dimensions of mold base cavity: | |
| Diameter: | Φ200mm |
| Depth: | H250mm |
| 3.Equipment dimension | |
| Mechanical size: | L9500mm×W3200mm×H3900mm |
| Overall weight: | 53T |
| Total Power: | 360KW (including extrusion cylinder heater 1.5KW×15=22.5KW) |
Shipment Pictures
Workshop show
FAQ
Q1: What is the difference between silver extrusion and silver wire drawing?
Extrusion is suitable for short-process molding of complex cross-sections, while wire drawing can only produce simple wires.
Q2: Equipment investment payback period?
Calculated based on a daily output of 200kg, about 6-12 months (silver processing has a higher profit).
Q3: How is the quality of Huanan Brand machine and the service life?
Huanan Brand is one of the best equipment for extrusion manufacturers in China. According to the feedback of old customers, under normal circumstances, the life of the machine can reach 15 years or more. Many well-know aluminum/Copper/Silver manufacturers are also our cooperative customers.
Q4: How to choose the right type machine ?
Please tell to us what kind of products you make ?Provide the profile sectional drawing dimensions ,we will according your size to calculate the suitable machine size.
Q5. Will Huanan provide installation service?
When the aluminum/copper/silver extrusion machine arrives at the customer's factory and meets the installation conditions, we will send technicians to the site to install it and train customer employees on how to use the equipment correctly.